Isoterma dan Termodinamika Adsorpsi Kation Cu2+ Fasa Berair pada Lempung Cengar Terpilar

Syaiful Bahri, Muhdarina Muhdarina, Nurhayati Nurhayati, Fitri Andiyani

Abstract


Pillared Cengar clay have been synthesized by two methods, first clay suspension is directly mixed into aqueous solution of hydroxy-aluminum polycations (WK) and second by mixing the clay suspension into the solution of sodium acetate and hydroxy-aluminumpolycations (SAK) sequentially. Both clays were calcined in air on atmospheric condition. Diffraction pola, surface morphology and cationexchange capacity of the pillared clays were characterized using X Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) andvisible spectrophotometry methods, respectively. The pillared clays showed increases of basal spacing from 3.57 Å to 4.55 Å and smectiteas a new mineral. Morphology of SAK has more heterogeneous surface with small plates and agglomeration of grains compare with WKwhich small plates. Adsorption of aqueous cation of Cu 2+ were studied on various variables of initial concentration as well as temperatures.As the result, adsorption of cation Cu 2+ on pillared Cengar clay is corresponding to Freundlich isotherm, while the adsorption capacity ofWK on cation Cu 2+ is slightly lower than SAK. The thermodynamic aspect, the WK is reflected possessed exothermic processes withnegative entropy, increased in Gibbs energy and non spontaneous, while the SAK possessed endothermic processes having positive entropy,decreased in Gibbs energy and non spontaneous.


Keywords


: basal spacing, freundlich, heterogeneous surface, pillared cengar-clay, smectite

Full Text:

PDF

References


Aceman, S. Lahav, N. & Yariv, S. 2000. A Thermo-XRD study of al-pillared smectites differing in source of charge, obtained in dialyzed, non-dialyzed and washed systems. Applied clay science 17: 99–126.

Altunlu, M. & Yapar, S. 2007. Effect of OH-/Al3+ and Al3+/clay ratio on the adsorption properties of al-pillared bentonites. Colloids and surfaces A: Physicochemical and engineering aspect 306: 88-94.

ATSDR. 2002. Draft toxicological profile for copper, Agency for toxic substances and disease registry. U.S. Department of health and human services, Atlanta, Georgia, http://www.atsdr.cdc.gov (5 September 2009).

Bhattacharyya, K.G. & Gupta, S.S. 2008. Adsorption of a few heavy metals on natural and modified kaolinite and montmorillonite: A review. advances in colloid and interface science 140: 114–131.

Centi, G. & Perathoner, S. 2008. Catalysis by layered materials: A review. Microporous and mesoporous materials 107: 3–15.

Eckenfelder, W.W. 2000. Industrial water pollution control. McGraw-Hill series in water resources and environmental engineering. 3rd ed. McGraw-Hill higher education.

Gupta., S.S. & Bhattacharyya.K.G. 2005. Interaction of metal ions with clays: I. A case study with Pb (II), Applied clay science 30: 199-208.

Gupta, S.S. & Bhattacharyya, K.G. 2008. Immobilization of Pb(II), Cd(II) and Ni(II) ions on kaolinite and montmorillonite surfaces from aqueous medium. Journal of Environmental Management 87: 46-58.

Mane, V.S. Mall, I.D. & Srivastava, V.C. 2007. Kinetic and equilibrium isotherm studies for the adsorptive removal of brilliant green dye from aqueous solution by rice husk ash. Journal of Environmental Management 84: 390–400.

Manohar, D.M. Noeline, B.F. & Anirudhan,T.S. 2006. Adsorption performance of al-pillared smektite clay for the removal of




DOI: http://dx.doi.org/10.31258/jnat.14.1.7-13

Refbacks

  • There are currently no refbacks.


Copyright (c) 2012 Syaiful Bahri, Muhdarina Muhdarina, Nurhayati Nurhayati, Fitri Andiyani

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.